The Dos and Don’ts of Pressure Washing Brick

Pressure washing brick can help to clean and restore the appearance of your brickwork. It is important to follow some basic guidelines when pressure washing brick, in order to avoid damaging the material. However, there are a few dos and don’ts to keep in mind when pressure washing brick. In this article, we will take a look at the dos and don’ts of pressure washing brick, so that you can get the most out of this process.

Pressure washing brick can help to remove built-up dirt, stains and other debris. But if it’s not done properly, you could damage the brick and even make the problem worse. Here are some dos and don’ts of pressure washing brick.

DOs:

• Use a pressure washer with adjustable pressure. Start with a lower setting and increase the pressure if needed. This will help to avoid damaging the brick. You can also use a power washer with a brick cleaning attachment.
• Wear protective clothing, including gloves, goggles and ear protection. Make sure the area you’re working in is well ventilated. This is important because pressure washing can release harmful chemicals into the air.
• Test the pressure washer on a small area of brick before proceeding with the entire project. This will help you to get a feel for the pressure and avoid damaging the brick. You should also test the cleaning solution on a small area before using it on the entire project.
• Work in sections, starting at the top and working your way down. This will help to avoid streaking and ensure that you don’t miss any areas.
• Rinse the brick thoroughly with clean water after pressure washing. This will help to remove any remaining dirt, debris or cleaning solution.

DON’Ts:

• Use a pressure washer with too much pressure. This can damage the brick and make the problem worse. The best way to avoid this is to start with a lower setting and increase the pressure if needed.
• Use a power washer without an adjustable pressure setting. This can damage the brick and make the problem worse. You can also use a power washer with a brick cleaning attachment.
• Use a pressure washer without first testing it on a small area of brick. This can damage the brick and make the problem worse. Always test the pressure washer on a small area of brick before proceeding with the entire project.
• Use a cleaning solution that is too harsh. This can damage the brick and make the problem worse. You should always test the cleaning solution on a small area before using it on the entire project.
• Use a pressure washer without rinsing the brick thoroughly with clean water afterwards. This can leave behind dirt, debris or cleaning solution, which can damage the brick over time.

Following these dos and don’ts will help you to pressure wash your brick safely and effectively. With a little care and attention, you can keep your brickwork looking its best for years to come.